Silicon Products Private Associates

Molecular sieve products are characterized by a high moisture adsorption capacity per volume to make optimal use of available container space in your filter system. In addition, the products exhibit superior attrition resistance and high strength, even after being loaded with moisture. All our products have been extensively tested in a great variety of traditional and new refrigerants and refrigeration oils. It can provide wide-ranging compatibility with refrigerants, and it's a universal desiccant which can be suitable to lots of refrigerants, such as R-12, R-22, R-124, R-125, R-143a, R-152, R410a and R407c, as well as their blends and the corresponding lubricants.

For the global energy shortage ethanol is gradually attracting interest taking it as a brand-new fuel. It can be used as an automotive fuel by itself and can be mixed with gasoline to reduce the octane value and improve combustion efficiency, easy up the uptight energy shortage situation. However, in ethanol, there is usually some moisture which will influence the ethanol performance to remove the moisture, we produces a desiccant especially for ethanol water removal to get a high purity ethanol.
3A molecular sieve is specifically designed for drying fuel grade ethanol. Ethanol can only be dried to 95.6% purity by traditional distillation. 3A selectively adsorbs the water from the solution to produce anhydrous ethanol with less than 1% water. This is the drying method of choice for fuel ethanol producers. the global energy shortage ethanol is gradually attracting interest taking it as a brand-new fuel. It can be used as an automotive fuel by itself and can be mixed with gasoline to reduce the octane value and improve combustion efficiency, easy up the uptight energy shortage situation. However, in ethanol, there is usually some moisture which will influence the ethanol performance to remove the moisture, we produces a desiccant especially for ethanol water removal to get a high purity ethanol.
3A molecular sieve is specifically designed for drying fuel grade ethanol. Ethanol can only be dried to 95.6% purity by traditional distillation. 3A selectively adsorbs the water from the solution to produce anhydrous ethanol with less than 1% water. This is the drying method of choice for fuel ethanol producers.

Molecular Sieve type 4A is an alkali alumino silicate; it is the sodium forms of the type A crystal structure.4A molecular sieve has an effective pore opening of about 4 angstroms (0.4nm). 4A molecular sieve will adsorb most molecules with a kinetic diameter of less than 4 angstroms and exclude those larger.

Such adsorbable molecules include simple gas molecules such as oxygen, nitrogen, carbon dioxide and straight chain hydrocarbons. Branched chain hydrocarbons and aromatics are excluded.

Molecular Sieve 13X APG is the alkali metal aluminosilicate with the form of the type X crystal and has a much larger pore opening than the type A crystals. It will adsorb molecules with critical diameter of less than 10 Angstrom (1 nm) and exclude those larger.
It also has the highest theoretical capacity of the common adsorbents and very good mass transfer rates. It can remove impurities too large to fit into a type A crystal and is commonly used to separate nitrogen from oxygen.

Molecular Sieve can absorb the water and organics existed in the layers of insulating glass but exclude nitrogen and oxygen, keep the IG units clear and transparent even at very low temperature. Furthermore, it can also reduce the effect of differential pressure between outside and inside of IGU caused by the seasonal and huge difference of temperature in day and night. Thus it resolves the problems of windows distortion caused by IG inflation and shrink, prolong the life span of IG windows.

PRODUCT DESCRIPTION :

AGOX is the lithium form aluminosilicate with X type crystal structure. And it is specially developed and designed molecular sieve for PSA/VPSA oxygen production from air with international advanced level.

APPLICATIONS :

• Molecular Sieve AGOX is mainly used in PSA/VPSA oxygen concentrator and oxygen concentrator device, and as well as the industrial VPSA unit, with the characteristics of higher N2 adsorption capacity and N2 with O2 selectivity, easy desorption and etc.
• Hand & Storage Recommendation.
• It should be handled to avoid generation of dusty conditions at the workplace. Storage in a dry warehouse is recommended. Open packages should be resealed to prevent contamination and adsorption of water other gases and vapors. The material in steel drum should be used within 24 months.

PRODUCT DESCRIPTION :

AGOX is the lithium form aluminosilicate with X type crystal structure. And it is specially developed and designed molecular sieve for PSA/VPSA oxygen production from air with international advanced level.

APPLICATIONS :

• Molecular Sieve AGOX is mainly used in PSA/VPSA oxygen concentrator and oxygen concentrator device, and as well as the industrial VPSA unit, with the characteristics of higher N2 adsorption capacity and N2 with O2 selectivity, easy desorption and etc.
• Hand & Storage Recommendation.
• It should be handled to avoid generation of dusty conditions at the workplace. Storage in a dry warehouse is recommended. Open packages should be resealed to prevent contamination and adsorption of water other gases and vapors. The material in steel drum should be used within 24 months.